We buy all the products we test — no freebies from companies. If you purchase through our links, we may earn a commission, which helps support our testing.
The Dropframe is a full-coverage trail helmet that aims to please those of us who spend most of our time on high-speed, chunky, descents but still like to pedal back to the top. Billed by Fox as an enduro/trail helmet, this model provides nearly the same coverage as a full-face helmet without the chin bar. It doesn't offer any fit adjustment other than two sets of pads with different thicknesses, however, and the sizing is a little bit on the small end when compared to the rest of the helmets in our test. After a few weeks smashing down the most technical trails, we discovered that we appreciated the extra coverage this helmet provides, but it left us wanting for better ventilation when the trail turned back uphill.
REASONS TO BUY
Dual-density EPS shell
Extended coverage
Large visor
REASONS TO AVOID
No fit adjustment
Sub-par ventilation
No rotational impact protection system
Updated Since Testing
The Fox Racing Dropframe helmet has been re-released with Mips, which we're happy to see. We're linking to the updated Mips model in our review, but note that our testing and scoring for this model still reflects the previous non-Mips helmet.
Extra coverage and protection without breaking the bank
If you don't mind the price tag you'll be rewarded with top-of-the-line comfort, protection, and versatility
Fully-featured and high coverage, this is a protective new helmet from POC
An affordable option with all-day comfort
This stylish lid offers modern, all-mountain coverage that won't break the bank
Rating Categories
Fox Racing Dropframe
Giro Manifest Spher...
POC Kortal Race Mips
Giro Radix Mips
Specialized Camber
Protection(25%)
9.0
9.0
10.0
8.0
8.0
Comfort(20%)
8.0
9.0
8.0
9.0
8.0
Ventilation(20%)
6.0
10.0
9.0
7.0
8.0
Features(15%)
7.0
9.0
9.0
6.0
6.0
Weight(10%)
5.0
7.0
7.0
9.0
8.0
Durability(10%)
8.0
9.0
9.0
9.0
8.0
Specs
Fox Racing Dropframe
Giro Manifest Spher...
POC Kortal Race Mips
Giro Radix Mips
Specialized Camber
Rotational Impact Protection System
Varizorb EPS liner
MIPS Spherical
MIPS Integra
MIPS
MIPS
Weight (Ounces, Grams)
17 oz, 499g
14.1 oz, 401g
14.14 oz, 401g
12.6 oz, 360g
13.8 oz, 394g
Number of vents
15
19
17
25
13
Goggle or Sunglasses Integration
Yes
Integrated eyewear grippers
Yes
No
No
Adjustable Visor
No
Yes
Yes
Yes
No
Sizes
S, M, L
S, M, L
XS/SM, M/L L/XL
S, M, L, XL
XS, S, M, L, XL
Certifications
CPSC, CE EN1078, AS/NZS2063
CPSC Bicycle for ages 5+, CE EN1078
CPSC Bicycle for ages 5+, EN1078, Dutch NTA 8776 e-bike, AS/NZS 2063
CPSC, CE EN1078
CPSC
Virginia Tech Helmet Safety Rating (if applicable)
5-star
5-star
Show full specification details ▼Hide full specification details ▲
Our Analysis and Test Results
Fox Racing's roots in motocross mean they're no strangers to making beefy, highly-protective helmets, so they were positioned perfectly to take advantage of the rapidly-evolving mountain bike helmet market with the Dropframe. Recently the lines between half-shell trail/XC helmets and full-face downhill helmets have been blurred. These days you can find convertible full-faces with a detachable chin bar, lightweight enduro full-faces, and, most recently, open-face helmets like the Dropframe. Released in 2019, the Dropframe was one of the first of a wave of open-face helmets to hit the scene, so we were excited to get our hands on it and see what it had to offer.
Performance Comparison
Part of the new full-coverage, open-face wave, the Dropframe provides ample protection.
Credit: Sarah Strobel
Protection
Protection is the Dropframe's greatest strength. On a continuum from lightweight cross-country helmets to full-on downhill lids, this model lands further towards the downhill side of things. The EPS shell is comprised of dual-density, impact-absorbing foam and provides far more coverage than your standard trail helmet. The shell extends far down the back of the head and drops down around the ears to provide extra protection from side impacts. Fox's M.O.RE. (Mandibular Occipital Reinforcement) guard design is meant to keep your ears, jaw, and occipital lobe safe. On your head, this helmet feels similar to Fox's Proframe full-face model without the chin bar.
The Dropframe is the most generously-padded helmet in the test.
Credit: Sarah Strobel
Comfort
Overall, the Dropframe is a comfortable helmet. The EPS shell is well contoured to fit a variety of head sizes, and the thick internal padding is well-placed. The ear-covering sections of the EPS shell flex to fit over your head as you pull the helmet on and help accommodate slightly for different head sizes. Out on the trail, we didn't have any nagging issues with pressure points or headaches.
During testing, we found that our size large Dropframe fit slightly smaller than other helmets we tested of the same size, and our biggest complaint with this model is the lack of options to adjust the fit. Our large-headed testers found that the ear-coverage sections of the EPS shell squeezed their heads a little bit tight, and their only recourse was to swap to the second, thinner set of pads that Fox provides with each Dropframe. Even after fiddling with the pads, a few of our testers found they couldn't get the fit dialed in just right for their heads.
The fixed visor is positioned for optimal airflow.
Credit: Sarah Strobel
Ventilation
Inevitably, as the Dropframe tries to strike a balance between downhill crusher and lightweight trail helmet, it gives up some ground in the airflow department. Even with eight large intake vents in the front and seven exhaust ports in the rear along with the open-ear design, this high coverage helmet doesn't facilitate airflow as well as the best trail helmets we tested. The interior front-to-back channels in the EPS foam are small, and the thick padding means things can get balmy quick at low speeds.
That being said, we think that the Dropframe vents well given its designed purpose. If you're spending most of your time ripping technical descents and aren't trying to break any records on the climb back up, this helmet does the job admirably. Even on hot days, we never ran into a situation where we had to stop and take the helmet off for relief like we would with a full face. We wouldn't want to wear it in our next XC race, but that's not what the designers at Fox had in mind.
Other than the magnetic buckle, this model is fairly bare bones in terms of features.
Credit: Sarah Strobel
Features
The base-model Dropframe is no-nonsense, and doesn't include much in the way of gadgets. The visor is fixed in a single position to optimize airflow, the only fit-adjustment option is pad swapping, and there is no rotational impact protection system included. It does include some of the staples of a modern, high-end helmet, however. The interior liner is made of antimicrobial, sweat-wicking material, the EPS shell is comprised of dual-density foam, and the M.O.RE protection system flexes to provide a slightly larger range of fit.
We were happy to see that Fox included the Fidlock magnetic buckle over the traditional buckle as well. Despite our early skepticism over the magnetic system, we became big fans throughout our test period and discovered that Fidlock is especially convenient in gravity applications when you're typically wearing thick, dexterity-hampering gloves. We're thinking that more helmets might start going the way of the magnetic buckle in the future.
Despite the ample coverage, it's surprisingly lightweight and isn't too much of a nuisance on the way back up the hill.
Credit: Sarah Strobel
Weight
Given its size and level of coverage, we were pleasantly surprised when we threw the Dropframe on the scale. It comes in just over one pound at 499 grams and is actually lighter than a few of the standard trail helmets we tested. For reference, the lightest helmets in the test came in right around 350 grams, and the only other full-coverage, open-face helmet we looked at, the Giro Tyrant weighs a whopping 718 grams.
The designers at Fox did a great job of making the Dropframe protective enough for serious terrain while keeping the weight down at a reasonably pedal-able level. Out on the trail, the helmet doesn't feel cumbersome on your head. As long as the weather isn't too hot, it can trick you into thinking it's a standard trail helmet, but at the same time, it provides peace of mind when you're on the ragged edge in gnarly terrain. This balance is where we think fox nailed it with the Dropframe.
This helmet is built to last so you can stay out on the trails.
Credit: Sarah Strobel
Durability
Like most Fox products that we've gotten our hands on, the Dropframe is a well-put-together product, and we think it will last as long as you can avoid hitting the deck. As with any EPS foam-shelled helmet, this one should be replaced after an impact, but if you can avoid it, the materials and construction will last. The outer shell is fused to the EPS in the mold, so there's no chance of separation over time, and the shell leaves no EPS exposed in vulnerable areas to chip away over time.
Value
The Dropframe is on the cheaper side when compared to other high-coverage gravity helmets out there, and it falls right in line with some of the high-end trail helmets we tested. If you're looking for a little bit of added protection in a lightweight package, we think this one is a good place to look. If you're not worried about weight, though, we feel that the Giro Tyrant is a more versatile option that includes a rotational impact system.
Conclusion
We found a lot to like and a little bit to gripe about with the Dropframe. We were a bit disappointed with the lack of a rotational impact system, and we were hoping for a little bit better ventilation from a helmet that touts itself as a trail/enduro lid. On the other hand, we were impressed with the lightweight, high-coverage combination that Fox cooked up.
